2005 Citroen C8

Nearside Rear Tyre slightly damaged (5.2.3 (d) (ii))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Front Tyre has ply or cords damaged (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Tyre slightly damaged (5.2.3 (d) (ii))

Central Brake pipe corroded, covered in grease or other material n/s front to rear brake pipe corroded. (1.1.11 (c))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened rear brake discs corroded and pitted. (1.1.14 (a) (ii))

Dipswitch does not operate immediately when selected on main beam switch not clicking off main beam when clicked on, (4.1.3 (b))

Offside Rear Service brake excessively binding (1.2.1 (f))

Central Brake pipe corroded, covered in grease or other material n/s front to rear brake pipe corroded. (1.1.11 (c))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened rear brake discs corroded and pitted. (1.1.14 (a) (ii))

Dipswitch does not operate immediately when selected on main beam (4.1.3 (b))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Central Brake pipe corroded, covered in grease or other material o/s front to rear brake pipe corroded. (1.1.11 (c))

Rear Coil spring corroded both rear coil springs corroded. (5.3.1 (b) (i))

Rear n/s/r o/s/r tyres cracking on inner walls and tread.

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Play in steering rack inner joint(s) ()

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Oil leak ()

Front Windscreen wiper does not clear the windscreen effectively nearside and offside split (8.2.2)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Front Inner Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Play in steering rack inner joint(s) ()

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Oil leak ()

Parking brake lever has little reserve travel (3.1.6b)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Front coil spring fractured (2.4.C.1a)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)