2006 Toyota Aygo

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Headlamp aim too high (4.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Headlamp aim projected beam image is obviously incorrect Due to lens (4.1.2 (c))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength End sill (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect Due to lens (4.1.2 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Battery insecure and likely to cause a short circuit terminal insecure (4.13 (a) (ii))

Emissions unable to be completed due to radiator has major leak (8.2.1.2 (d))

Nearside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced underside on main body by fuel tank (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced underside on main body by fuel tank (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both sides are heavily corroded (1.1.14 (a) (ii))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Road wheel slightly distorted inner rim (5.2.2 (c) (i))

Windscreen wiper blade defective (3.4 (b) (i))

both rear shock absorbers are heavily corroded

vehicle underside has heavy surface corrosion throughout !!!!!

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Tyre fouling a part of the vehicle (5.2.3 (f))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Undertray likely to become detached (6.2.1 (a) (ii)) DANGEROUS

Offside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front shock outer casing corroded

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front shock outer casing corroded

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear axle beam corroding

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear axle beam corroding

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

rear suspension components corroded

Nearside Rear Suspension component mounting prescribed area is excessively corroded outer cill (2.4.A.3)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Macpherson strut corroded but not seriously weakened (2.4.G.1)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Headlamp aim too high (1.8)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear exhaust mounting poor

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Front Brake pad(s) wearing thin (3.5.1g)