MOT Status
ExpiredMileage
101,191 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Emissions not tested due to condition of exhaust (8.2.1.2 (d))
Nearside Rear Exhaust system insecure (6.1.2 (a))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Offside Rear Exhaust system insecure (6.1.2 (a))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Emissions not tested exhaust blow and excessive smoke (8.2.1.2 (d))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Rear Exhaust silencer insecure (8.1.1 (b) (i))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Exhaust has a minor leak of exhaust gases exhaust has slight blow at centre joint (7.1.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill corroded (2.4.A.3)
floors corroded
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt front suspension arm ball joint dustcover fitted (2.4.G.2)
Nearside Rear Stop lamp not working (1.2.1b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Exhaust has a minor leak of exhaust gases exhaust has slight blow at centre joint (7.1.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill corroded (2.4.A.3)
floors corroded
Parking brake lever has little reserve travel (3.1.6b)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Vehicle structure has slight corrosion (6.1.B.2)
exhaust system corroded
Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside rear brake binding (3.7.B.1)
Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)
Offside rear brake binding (3.7.B.1)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Parking brake lever has little reserve travel (3.1.6b)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Vehicle structure has slight corrosion (6.1.B.2)
exhaust system corroded
Engine covers fitted obscuring some components in the engine bay
Nearside Body has slight corrosion (6.1.B.2)
Offside Body has slight corrosion (6.1.B.2)
Under-trays fitted obscuring some underside components
Vehicle structure has slight corrosion (6.1.A.1)
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear Anti-roll bar linkage insecure (2.4.G.1)
Engine covers fitted obscuring some components in the engine bay
Nearside Body has slight corrosion (6.1.B.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Body has slight corrosion (6.1.B.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Under-trays fitted obscuring some underside components
Vehicle structure has slight corrosion (6.1.A.1)
third brake light not working
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
corrosion to exhaust system front and rear
o/ and n/s outer sill
underside corrosion
Nearside Inner Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Inner Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Rear Exhaust system not adequately supported (7.1.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Front Front wheel bearing has slight play (2.5.A.3c)
both wiper rubbers deteriorated
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MJ55 WZD is a 2005 Mazda 6 in Black with a 1,999cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 60.9%.
Across all 2005 Mazda 6 models, the average MOT pass rate is 72.4% with a typical mileage of 77,324 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying MJ55 WZD, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 21 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of MJ55 WZD?
You can check the full history of MJ55 WZD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MJ55 WZD registered?
MJ55 WZD is a 2005 Mazda 6, first registered on 29 September 2005.
Is MJ55 WZD safe to buy?
The MOT history for MJ55 WZD shows 23 tests with a 60.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MJ55 WZD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MJ55 WZD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.