MOT Status
ExpiredMileage
126,243 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced general corrosion to underside of vehicle and suspension components (6.1.1 (c) (i))
Nearside Front Inner Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded and holed (7.1.1 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced general corrosion to underside of vehicle and suspension components (6.1.1 (c) (i))
Nearside Front Inner Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement TRAILING ARM (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
REAR EXHAUST HEAT SHIELD LOOSE
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement TRAILING ARM (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Headlamp aim too high (4.1.2 (a))
REAR EXHAUST HEAT SHIELD LOOSE
BOTH REAR TRAILING ARMS CORRODED
Nearside Front Outer Tyre worn close to legal limit/worn on edge EDGE (5.2.3 (e))
Nearside Rear Outer Tyre slightly damaged/cracking or perishing WALL (5.2.3 (d) (ii))
Offside Rear TRAILING ARM BUSH SEPERATING
REAR EXHAUST HEAT SHIELD LOOSE
REAR SUBFRAME CORRODED
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))
Windscreen washer provides insufficient washer liquid (3.5 (a))
BOTH REAR TRAILING ARMS CORRODED
Nearside Front Outer Tyre worn close to legal limit/worn on edge EDGE (5.2.3 (e))
Nearside Rear Outer Tyre slightly damaged/cracking or perishing WALL (5.2.3 (d) (ii))
Offside Rear TRAILING ARM BUSH SEPERATING
REAR EXHAUST HEAT SHIELD LOOSE
REAR SUBFRAME CORRODED
DAMAGE TO NEARSIDE REAR LIGHT UNIT
Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i))
Nearside Front Outer Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i))
DAMAGE TO NEARSIDE REAR LIGHT UNIT
OIL LEAK
Nearside Front Suspension arm pin or bush excessively worn REAR INNER WISHBONE BUSH (5.3.4 (a) (i))
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Windscreen washer provides insufficient washer liquid (3.5 (a))
OIL LEAK
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Suspension arm rubber bush deteriorated resulting in excessive movement track control arm (2.4.G.2)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Suspension arm rubber bush deteriorated resulting in excessive movement track control arm (2.4.G.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake pad(s) modified but not seriously weakened (3.5.1n)
Rear Brake pad(s) wearing thin (3.5.1g)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Play in steering rack inner joint(s)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nail in offside rear tyre
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Play in steering rack inner joint(s)
osf tyre sidewall damaged (cords not exposed)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Dodge Caliber?
Based on 69,277 MOT tests across 4,774 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MK07 NAO is a 2007 Dodge Caliber in Red with a 1,798cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 58.3%.
Across all 2007 Dodge Caliber models, the average MOT pass rate is 66.5% with a typical mileage of 66,005 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Dodge Caliber fails its MOT is suspension arm has excessive play in a ball joint, accounting for 3,411 recorded failures. If you're considering buying MK07 NAO, it's worth having these areas checked by a mechanic before committing.
The Dodge Caliber typically stays on UK roads for around 20 years. At 19 years old, this Dodge Caliber is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of MK07 NAO?
You can check the full history of MK07 NAO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MK07 NAO registered?
MK07 NAO is a 2007 Dodge Caliber, first registered on 23 March 2007.
Is MK07 NAO safe to buy?
The MOT history for MK07 NAO shows 24 tests with a 58.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MK07 NAO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MK07 NAO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.