2013 Yamaha Yzf

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Nearside Rear indicator lens missing but bulb is emmitting the correct colour

Steering headbearing has slight free play (2.2.2 (f) (i))

Drive chain excessively tight (6.1.7 (k) (i))

Front Position lamp missing (4.2.1 (a))

Front Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Rear Brake excessively binding (1.2.1 (f))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Front Tyre worn close to the legal limit (5.2.3 (e))

Nearside Front Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Brake performance not tested not tested nail in front tyre (1.2.1 (g))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Headlamp light intensity severely reduced (4.1.4 (a))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Front Nail in tyre ()

Wheel alignment slightly misaligned (2.4 (a))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii))

Brake lever has insufficient reserve travel (1.1.2 (a))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Exhaust noisy (7.1.2)

Headlamp damaged but function not impaired dip beam surround of headlight slightly distorted but beam pattern is visable on headlight beam tester (1.2.3a)

Front Brake disc(s) has excessive run out (3.2.A1m)

Front Wheel has an excessively distorted bead rim. front rim has excess run out to offside front area of rim bead (4.2.2)

Rear Brake disc(s) excessively worn below minimum wear limit 3.5mm (3.2.A1l)

Exhaust noisy (7.1.2)

Headlamp damaged but function not impaired dip beam surround of headlight slightly distorted but beam pattern is visable on headlight beam tester (1.2.3a)