2007 Chevrolet Matiz

Nearside Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))

Nearside Front Inner Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Suspension component mounting prescribed area is corroded but not considered excessive Rear beam axle (5.3.6 (a) (i))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS

Nearside Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))

Nearside Front Inner Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Suspension component mounting prescribed area is corroded but not considered excessive Rear beam axle (5.3.6 (a) (i))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Passenger seat(s) missing at time of test ()

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear Upper Shock absorbers has an excessively worn bush (5.3.2 (c))

Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Upper Shock absorbers has an excessively worn bush (5.3.2 (c))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Passenger seat(s) missing at time of test ()

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Power steering component(s) has slight seepage from a component (2.3.3b)

Exhaust system not adequately supported front pipe bracket broken (7.1.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Headlamp aim too high (1.8)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Brake pipe excessively corroded main length (3.6.B.2c)

Offside Headlamp aim too high (1.8)

Offside Rear Rear wheel bearing rough when rotated (2.6.1)

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Offside rear brake binding (3.7.B.1)