2009 Citroen C3

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Wheel bearing so rough it is likely to overheat or break up and play (5.1.3 (b) (ii)) DANGEROUS

Nearside Rear Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Front Inner Tyre worn close to legal limit/worn on edge edge wear (5.2.3 (e))

Offside Front Inner Tyre worn close to legal limit/worn on edge edge wear (5.2.3 (e))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Rear Reversing lamp inoperative (4.6.1 (a))

Nearside Front Inner Tyre worn close to legal limit/worn on edge edge wear (5.2.3 (e))

Offside Front Inner Tyre worn close to legal limit/worn on edge edge wear (5.2.3 (e))

Exhaust mounting defective Front and rear hanger broke (6.1.2 (a))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Front Inner Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Exhaust mounting defective (6.1.2 (a))

Exhaust emissions exceed default limit of 1.5m-1 plate limit of 1.8 test result 3.09 (8.2.2.2 (b))

Exhaust mounting defective (6.1.2 (a))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Exhaust emissions exceed manufacturer's specified limit plate limit of 1.8 test result of 2.37 (8.2.2.2 (a))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Windscreen wiper blade defective (3.4 (b) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust emissions exceed manufacturer's specified limit limit of 1.8 test result of 2.16 (8.2.2.2 (a))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Reversing lamp inoperative (4.6.1 (a))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Headlamp aim too high (4.1.2 (a))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Exhaust system not adequately supported (7.1.1)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

advise both rear tyres perished

offside front tyre 3mm

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)