2012 Ford S-max

Exhaust mounting defective (6.1.2 (a))

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Exhaust mounting defective (6.1.2 (a))

Brake pipe corroded, covered in grease or other material front to offside rear (1.1.11 (c))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Macpherson strut mounting damaged but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component pin or bush slightly worn (5.3.4 (a) (i))

Offside Rear Suspension component pin or bush slightly worn (5.3.4 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement rear arm front trailing arm bush (5.3.4 (a) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement rear arm front trailing arm bush (5.3.4 (a) (i))

Rear Exhaust silencer slightly loose (8.1.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre worn close to legal limit/worn on edge scrubbing off on inner edge (5.2.3 (e))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge scrubbing off on inner edge (5.2.3 (e))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Nearside Rear Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge wearing on edges (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge wearing on edges (5.2.3 (e))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Side repeater missing (4.4.1 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge wearing on both edges (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge wearing on inner edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge wearing on edges (5.2.3 (e))

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)