2004 Mitsubishi Outlander

EML on

Nearside Rear Anti-roll bar has slight play in a pin/bush D bush (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a pin/bush D bush (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Upper Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Water ingress o/S headlight but not affecting beam image

Rear Both rear discs have surface corrosion

Rear Both rear tyres cracked and perished due to age deterioration

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

EML on

Nearside Rear Anti-roll bar has slight play in a pin/bush D bush (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a pin/bush D bush (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Upper Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Water ingress o/S headlight but not affecting beam image

Power steering fluid level below minimum (2.3.1)

Rear Both rear discs have surface corrosion

Rear Both rear tyres cracked and perished due to age deterioration

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

EML on

Exhaust has a minor leak of exhaust gases System badly corroded and blowing at joint (7.1.2)

Offside Front Tyre worn on inner edge

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Rear Upper Tie bar/rod has excessive play in a pin/bush (2.4.G.2)

Parking brake: efficiency below requirements (3.7.C.1b)

EML on

Exhaust has a minor leak of exhaust gases System badly corroded and blowing at joint (7.1.2)

Offside Front Tyre worn on inner edge

Parking brake lever has little reserve travel (3.1.6b)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

EML on

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

sbstantial body damage throughout

Offside Stop lamp not working (1.2.1b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.C.1b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Body has various damage all round but no sharp edges

Centre exhaust bracket broken away but system still supported

EML on

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Stop lamp damaged, but still visible from a reasonable distance (1.2.1d)

OS mirror assembly has slight damage

OSF bumper corner slightly loose

Exhaust has a minor leak of exhaust gases (7.1.2)

N/S/R light unit damaged

Offside Front Body has a sharp edge caused by damage (6.1.C.1)

Exhaust has a minor leak of exhaust gases (7.1.2)

N/S/R light unit damaged

Nearside Front Anti-roll bar linkage insecure (2.4.G.1)

Offside Front Anti-roll bar linkage insecure (2.4.G.1)

offside rear light unit casing damaged but reflectors and lenses in working order

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Rear Brake pad(s) wearing thin (3.5.1g)

Plastic oversills fitted not allowing a full inspection of sill structure.