MOT Status
ValidMileage
140,156 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords inner edge (5.2.3 (d) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))
Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
oil leak
suspension components corroded
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
underneath covered with under seal
Front Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
underneath covered with under seal
Front Brake pad(s) wearing thin Both sides (1.1.13 (a) (ii))
Front Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Nearside Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Lower Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Upper Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Fluid leak, but not excessive (8.4.1 (a) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Lower Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Both sides shock absorber casing corroded
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear tow bar corroded
Front Brake pad(s) wearing thin Both sides (1.1.13 (a) (ii))
Front Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Nearside Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Lower Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Upper Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Fluid leak, but not excessive (8.4.1 (a) (i))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Lower Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Both sides shock absorber casing corroded
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear tow bar corroded
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive lower arm front mounting area (5.3.6 (a) (i))
Nearside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear shock absorber casing corroded
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive lower arm front mounting area (5.3.6 (a) (i))
Offside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear tow bar corroded
Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive lower arm front mounting area (5.3.6 (a) (i))
Nearside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear shock absorber casing corroded
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive lower arm front mounting area (5.3.6 (a) (i))
Offside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear tow bar corroded
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement compliance bush (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Windscreen washer not working (3.5 (a))
Offside Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement compliance bush (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Nearside Front Inner tyre worn on inner egde
Nearside Rear Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Bonded suspension unit deteriorated but can function as intended compliance bush (2.4.F.3)
Offside Front Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Outer tyre worn on outside edge
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front brake caliper has restricted free movement (3.5.1k)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Nearside Front Inner tyre worn on inner egde
Nearside Rear Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Bonded suspension unit deteriorated but can function as intended compliance bush (2.4.F.3)
Offside Front Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Outer tyre worn on outside edge
Rear discs corroded.
Rear discs corroded.
Nearside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)
Rear registration plate deteriorated (6.3.1d)
Trailer electrical socket insecure (1.9.3a)
Nearside Front Headlamp aim too low and too far to the right. (1.8)
Offside Front Headlamp aim too low and too far to the right. (1.8)
Rear discs corroded.
Engine covers fitted obscuring some components in the engine bay
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Under-trays fitted obscuring some underside components
Engine covers fitted obscuring some components in the engine bay
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Under-trays fitted obscuring some underside components
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Child seat fitted not allowing full inspection of adult belt
Nearside Front Headlamp aim too high (1.8)
Offside Front Headlamp aim too high and too far to the right. (1.8)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Small cut to nearside front tyre sidewall
How Reliable is the Honda Accord?
Based on 2,311,969 MOT tests across 198,303 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
ML06 JFO is a 2006 Honda Accord in Grey with a 2,209cc diesel engine. This vehicle has been through 29 MOT tests with a personal pass rate of 65.5%.
Across all 2006 Honda Accord models, the average MOT pass rate is 74.3% with a typical mileage of 98,038 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Honda Accord fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 104,224 recorded failures. If you're considering buying ML06 JFO, it's worth having these areas checked by a mechanic before committing.
The Honda Accord typically stays on UK roads for around 33 years. At 20 years old, this Honda Accord is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of ML06 JFO?
You can check the full history of ML06 JFO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was ML06 JFO registered?
ML06 JFO is a 2006 Honda Accord, first registered on 30 March 2006.
Is ML06 JFO safe to buy?
The MOT history for ML06 JFO shows 29 tests with a 65.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does ML06 JFO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on ML06 JFO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.