2007 Peugeot 206

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced both sides (6.1.1 (c) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Items removed from driver's view prior to test

Oil leak, but not excessive border line (8.4.1 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides --- chassis legs (5.3.6 (a) (i))

parking brake lever has very little reserve travel

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Items removed from driver's view prior to test

Oil leak, but not excessive border line (8.4.1 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides --- chassis legs (5.3.6 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

parking brake lever has very little reserve travel

Front Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Items removed from driver's view prior to test

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (chassis) (5.3.6 (a) (i))

parking lever has high travel

Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition rear silencer missing (8.1.1 (a))

Headlamp aim projected beam image is obviously incorrect both sides (4.1.2 (c))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Wheel bearing rough when rotated noisy (5.1.3 (b) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Windscreen washer not working (3.5 (a))

Offside Front Items removed from driver's view prior to test

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (chassis) (5.3.6 (a) (i))

parking lever has high travel

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

petrol tank support strap corroded

Nearside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Suspension rod ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

petrol tank support strap corroded

Offside Front Headlamp not working on dipped beam (1.7.5a)

both front brake discs corroding

nsf tyre low on tread

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Shock absorber has an excessively worn bush (2.7.4)

Registration plate lamp not working (1.1.C.1d)

exhaust strap corroded on back box

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

oil lev low

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

oil lev low