MOT Status
ExpiredMileage
102,269 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords inner side wall (5.2.3 (d) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Nail in tyre ()
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Tyre has a cut but not deep enough to reach the ply or cords inner side wall (5.2.3 (d) (i))
Nearside Front Tyre slightly damaged inner side wall (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Tyre has a cut but not deep enough to reach the ply or cords inner side wall (5.2.3 (d) (i))
Nearside Front Tyre slightly damaged inner side wall (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Front Headlamp not working on main beam (4.1.1 (a) (ii))
Front Position lamp not working (4.2.1 (a))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Side repeater not working (1.4.A.2c)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Hyundai I30?
Based on 1,479,391 MOT tests across 127,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
ML10 HDG is a 2010 Hyundai I30 in Black with a 1,396cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 58.8%.
Across all 2010 Hyundai I30 models, the average MOT pass rate is 72.7% with a typical mileage of 62,639 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Hyundai I30 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 12,383 recorded failures. If you're considering buying ML10 HDG, it's worth having these areas checked by a mechanic before committing.
The Hyundai I30 typically stays on UK roads for around 19 years. At 16 years old, this Hyundai I30 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of ML10 HDG?
You can check the full history of ML10 HDG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was ML10 HDG registered?
ML10 HDG is a 2010 Hyundai I30, first registered on 31 March 2010.
Is ML10 HDG safe to buy?
The MOT history for ML10 HDG shows 17 tests with a 58.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does ML10 HDG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on ML10 HDG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.