MOT Status
ValidMileage
106,366 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced both rear inner sills corroded (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Front Tyre worn close to legal limit/worn on edge both wearing heavily on inner edges (5.2.3 (e))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced both rear inner sills corroded (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Front Windscreen washer not working (3.5 (a))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Rear Brake pad(s) wearing thin n/s/r on 2mm o/s/r on 3mm (1.1.13 (a) (ii))
Rear Sub-frame corroded but not seriously weakened including arms (surface corrosion) (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Windscreen washer not working (3.5 (a))
Offside Front Anti-roll bar linkage ball joint likely to become detached is detached (5.3.4 (a) (ii)) DANGEROUS
Rear Sub-frame corroded but not seriously weakened including arms (surface corrosion) (5.3.3 (b) (i))
various corrosion
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Front Brake pad(s) wearing thin very low (on limit) (1.1.13 (a) (ii))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
various corrosion
Rear wiper rubber split
engine oil weaping from sump seal
Offside Rear Registration plate lamp not working (1.1.C.1d)
Rear wiper rubber split
engine oil weaping from sump seal
Parking brake lever has no reserve travel NSR handbrake mechanism (3.1.6b)
Nearside Rear Rear reflector excessively damaged so that its function is impaired (1.5.1c)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nail in nearside front tyre
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
ML11 JHZ is a 2011 Mazda 3 in Black with a 1,598cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 61.9%.
Across all 2011 Mazda 3 models, the average MOT pass rate is 77.9% with a typical mileage of 64,021 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying ML11 JHZ, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 15 years old, this Mazda 3 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of ML11 JHZ?
You can check the full history of ML11 JHZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was ML11 JHZ registered?
ML11 JHZ is a 2011 Mazda 3, first registered on 31 March 2011.
Is ML11 JHZ safe to buy?
The MOT history for ML11 JHZ shows 21 tests with a 61.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does ML11 JHZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on ML11 JHZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.