MOT Status
ValidMileage
167,766 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material Front to rear brake pipes (1.1.11 (c))
Central Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front Headlamp lens slightly defective Both sides (4.1.1 (b) (i))
Front Tyre worn close to legal limit/worn on edge Both sides (5.2.3 (e))
Nearside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Brake hose excessively chafed (1.1.12 (b) (ii))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Brake pipe corroded, covered in grease or other material Front to rear brake pipes (1.1.11 (c))
Central Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front Headlamp lens slightly defective Both sides (4.1.1 (b) (i))
Front Tyre worn close to legal limit/worn on edge Both sides (5.2.3 (e))
Nearside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside sill step loose
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Rear Brake cable damaged (1.1.15 (a))
Offside Rear Service brake excessively binding (1.2.1 (f))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Rear Service brake imbalanced across an axle (1.2.1 (b) (i))
Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside sill step loose
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Rear Suspension arm pin or bush excessively worn trailing arm bush (5.3.4 (a) (i))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))
Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))
Brake pad(s) wearing thin All front (1.1.13 (a) (ii))
Brake pad(s) less than 1.5 mm thick All rear (1.1.13 (a) (ii)) DANGEROUS
Brake pad(s) wearing thin All front (1.1.13 (a) (ii))
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Front registration plate delaminated but not likely to be misread (6.3.1d)
Front registration plate delaminated but not likely to be misread (6.3.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
How Reliable is the Vauxhall Vivaro?
Based on 3,853,716 MOT tests across 280,649 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
ML12 UPE is a 2012 Vauxhall Vivaro in White with a 1,995cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 55%.
Across all 2012 Vauxhall Vivaro models, the average MOT pass rate is 67.7% with a typical mileage of 102,326 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Vauxhall Vivaro fails its MOT is track rod end ball joint has excessive play, accounting for 144,341 recorded failures. If you're considering buying ML12 UPE, it's worth having these areas checked by a mechanic before committing.
The Vauxhall Vivaro typically stays on UK roads for around 24 years. At 14 years old, this Vauxhall Vivaro is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of ML12 UPE?
You can check the full history of ML12 UPE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was ML12 UPE registered?
ML12 UPE is a 2012 Vauxhall Vivaro, first registered on 9 May 2012.
Is ML12 UPE safe to buy?
The MOT history for ML12 UPE shows 20 tests with a 55% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does ML12 UPE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on ML12 UPE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.