MOT Status
ValidMileage
65,273 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Front Side repeater slightly discoloured (4.4.3 (a))
REAR AXLE CORRODED
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Brake fluid significantly below minimum mark (1.1.10 (d) (ii))
Central Rear Seat belt not functioning as intended (7.1.2 (c))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Headlamp aim too high (4.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Brake pipe corroded, covered in grease or other material front to rear x2 (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened axle (5.3.3 (b) (i))
Battery insecure and likely to fall from carrier (4.13 (a) (ii))
Nearside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Headlamp aim too low (4.1.2 (a))
Offside Front Brake hose excessively stretched (1.1.12 (b) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Brake pipe corroded, covered in grease or other material front to rear x2 (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened axle (5.3.3 (b) (i))
Nearside Brake pipe corroded, covered in grease or other material front to rear x2 (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Brake pipe excessively corroded front to rear (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Side repeater incorrect colour (4.4.3 (a))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Registration plate lamp does not illuminate simultaneously with the position lamps and offside rear (4.7.2 (a))
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Parking brake lever has little reserve travel (3.1.6b)
Nearside Front Brake pad(s) less than 1.5 mm thick and osf. (3.5.1g)
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Side repeater not working (1.4.A.2c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Parking brake lever has little reserve travel (3.1.6b)
Offside Front Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front All position lamps not working both front inoperative/ side lights (1.1.A.3b)
Nearside Front Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Lower Suspension arm has excessive play in a pin/bush Front Bush (2.4.G.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Side repeater not working (1.4.A.2c)
Front Brake discs worn
Front Inner Brake pad(s) wearing thin (3.5.1g)
Items removed from driver's view prior to test ()
Offside Front Inner CV boot clip insecure - still preventing ingress of dirt
Oil leak ()
Parking brake lever has little reserve travel (3.1.6b)
Supplementary Restraint System warning lamp does not illuminate (5.4.2)
How Reliable is the Hyundai I10?
Based on 2,829,935 MOT tests across 251,032 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
ML13 CJO is a 2013 Hyundai I10 in Grey with a 1,248cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 55.6%.
Across all 2013 Hyundai I10 models, the average MOT pass rate is 78.1% with a typical mileage of 35,671 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Hyundai I10 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 15,951 recorded failures. If you're considering buying ML13 CJO, it's worth having these areas checked by a mechanic before committing.
The Hyundai I10 typically stays on UK roads for around 18 years. At 13 years old, this Hyundai I10 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of ML13 CJO?
You can check the full history of ML13 CJO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was ML13 CJO registered?
ML13 CJO is a 2013 Hyundai I10, first registered on 29 April 2013.
Is ML13 CJO safe to buy?
The MOT history for ML13 CJO shows 18 tests with a 55.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does ML13 CJO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on ML13 CJO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.