2006 Toyota Aygo

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Headlamp lens slightly defective both (4.1.1 (b) (i))

Nearside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Rear both outer sills corroded

Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt both sides (2.1.3 (g) (i))

Nearside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt both sides (2.1.3 (g) (i))

Nearside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Tyre worn close to legal limit/worn on edge both sides inner edge (5.2.3 (e))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security outer sill (6.2.2 (d) (i))

Front Tyre worn close to legal limit/worn on edge both sides inner edge (5.2.3 (e))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security outer sill (6.2.2 (d) (i))

Nearside Front Headlamp aim too high (4.1.2 (a))

Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Rear Tyre slightly damaged/cracking or perishing both sides ....date stamp 3214 (5.2.3 (d) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement ALL (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened BOTH (3.5.1i)

Offside Front Tyre worn close to the legal limit 2 - 3 mm (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement ALL (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened BOTH (3.5.1i)

Offside Front Tyre worn close to the legal limit 2 - 3 mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

engine management light on indicating a fault

Engine fault light on

Front registration plate delaminated but not likely to be misread (6.3.1d)

Offside and nearside front tyres slightly worn (tread depths 3mm)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)