2008 Mercedes-benz C

Front Brake disc worn, pitted or scored, but not seriously weakened n.s & o.s (1.1.14 (a) (ii))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive n.s & o.s (5.3.6 (a) (i))

Offside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Front Play in steering rack inner joint(s)

Front Wheel bearing has slight play both (5.1.3 (a) (i))

Rear Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Front Play in steering rack inner joint(s)

Front Wheel bearing has slight play both (5.1.3 (a) (i))

Rear Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Front Tyre has ply or cords exposed both (5.2.3 (d) (ii))

Front Tyre tread depth below requirements of 1.6mm both (5.2.3 (e))

Front Suspension arm ball joint has slight play BOTH (5.3.4 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement BOTH (5.3.4 (a) (i))

Front Brake pipe excessively corroded BOTH (1.1.11 (c))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Front Suspension arm ball joint has slight play BOTH (5.3.4 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement BOTH (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint excessively worn rear (5.3.4 (a) (i))

Offside Front Suspension arm ball joint excessively worn rear (5.3.4 (a) (i))

Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Front Brake pipe at imminent risk of failure or fracture (1.1.11 (a)) DANGEROUS

Offside Front Brake pipe at imminent risk of failure or fracture (1.1.11 (a)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Suspension arm ball joint has slight play Rear arm (5.3.4 (a) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Suspension arm ball joint has slight play Rear arm (5.3.4 (a) (i))

Road wheel fixing missing All four wheels (5.2.1 (a) (i))

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)

Brake pipe excessively corroded over the rear axle (3.6.B.2c)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Brake pedal creeps down when held under pressure (3.3.B.1a) DANGEROUS

Brake pedal spongy suspect a leak but unable to see due to the plastic covers that are fitted to the underside of the vehicle (3.3.B.1b) DANGEROUS

Brake performance not tested (3.7.A.1) DANGEROUS

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Rear position lamp(s) not working (1.1.A.3b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Upper Rear position lamp(s) not working (1.1.A.3b)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp aim too low (1.8)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp aim too low (1.8)