2008 Citroen C4

Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust emits black smoke during acceleration (8.2.1.2 (g))

Front Inner Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Front Suspension arm pin or bush worn but not resulting in excessive movement and rear (5.3.4 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill multiple holes (6.1.1 (c) (i))

Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust emits black smoke during acceleration (8.2.1.2 (g))

Front Inner Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Front Suspension arm pin or bush worn but not resulting in excessive movement and rear (5.3.4 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Coil spring corroded all four front and rear offside and nearside (5.3.1 (b) (i))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened offside and nearside (1.1.14 (a) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced including sills underbody and components (6.1.1 (c) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

general surface rust/corrosion to underbody sills and components

sill covers engine cover and under tray fitted

Front Brake disc worn, but not excessively both (1.1.14 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Offside Front Service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.2.2 (a) (i))

Rear Brake disc worn, but not excessively both (1.1.14 (a) (i))

tested in wet cnditions

Brake performance not tested Due to ball joint condition (1.2.1 (g))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Suspension component ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Tyre has ply or cords exposed Inner edge (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre has ply or cords exposed Inner edge (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Possible injector seal fault

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Service brake excessively binding (1.2.1 (f))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre obviously under inflated screw in tyre (5.2.3 (l))

Nearside Front Tie bar/rod has slight play in a ball joint (2.4.G.2)