MOT Status
ValidMileage
39,132 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
How Reliable is the Hyundai I10?
Based on 2,829,935 MOT tests across 251,032 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
ML63 FDM is a 2013 Hyundai I10 in Black with a 1,248cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 73.3%.
Across all 2013 Hyundai I10 models, the average MOT pass rate is 78.1% with a typical mileage of 35,671 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Hyundai I10 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 15,951 recorded failures. If you're considering buying ML63 FDM, it's worth having these areas checked by a mechanic before committing.
The Hyundai I10 typically stays on UK roads for around 18 years. At 13 years old, this Hyundai I10 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of ML63 FDM?
You can check the full history of ML63 FDM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was ML63 FDM registered?
ML63 FDM is a 2013 Hyundai I10, first registered on 24 October 2013.
Is ML63 FDM safe to buy?
The MOT history for ML63 FDM shows 15 tests with a 73.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does ML63 FDM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on ML63 FDM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.