2004 Fiat Panda

Exhaust has a minor leak of exhaust gases middle (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge outer edge (5.2.3 (e))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive floor/chassis (7.1.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Exhaust has a minor leak of exhaust gases middle (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge outer edge (5.2.3 (e))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive floor/chassis (7.1.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis/spring mount (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis/spring mount (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis/spring mount (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis/spring mount (5.3.6 (a) (i))

Offside Side repeater slightly discoloured (4.4.3 (a))

Nearside Rear suspension bump stop is insecure

Nearside Side repeater slightly discoloured (4.4.3 (a))

Offside Side repeater slightly discoloured (4.4.3 (a))

Nearside Rear suspension bump stop is insecure

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Nearside Side repeater slightly discoloured (4.4.3 (a))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Side repeater slightly discoloured (4.4.3 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Side repeater slightly discoloured (4.4.3 (a))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Side repeater slightly discoloured (4.4.3 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Side repeater slightly discoloured (4.4.3 (a))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Side repeater slightly discoloured (4.4.3 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Nearside Rear suspension bump stop is missing

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))

Nearside Side repeater slightly discoloured (4.4.3 (a))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Side repeater slightly discoloured (4.4.3 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear suspension bump stop is missing

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))

Nearside Side repeater slightly discoloured (4.4.3 (a))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Side repeater slightly discoloured (4.4.3 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Exhaust has a minor leak of exhaust gases flexi section (7.1.2)

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement wishbone, rear (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Front Exhaust has a minor leak of exhaust gases flexi section (7.1.2)

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement wishbone, rear (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front suspension has slight movement at a wishbone pin or bush rear bush (2.5.A.1c)

rear exhaust clamp is missing

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front suspension has slight movement at a wishbone pin or bush rear bush (2.5.A.1c)

rear exhaust clamp is missing

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Centre Exhaust system not adequately supported (7.1.1)

Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

front brake application uneven (3.7.B.2)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Offside Front Brake pad(s) wearing thin (3.5.1g)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Shock absorber has an excessively worn shock absorber pivot (2.7.4)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Shock absorber has an excessively worn shock absorber pivot (2.7.4)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

front brakes release unevenly (3.7.B.4)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)