2004 Fiat Panda

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Centre, outer sill (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (Multiple holes (7.1.1 (a) (i))

Offside Headlamp aim too high (4.1.2 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Centre, chassis rail (2 Holes (7.1.1 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Centre, outer sill (Multiple holes (7.1.1 (a) (i))

Exhaust back box corroded

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Offside and nearside front tyres cracking on inner and outer sidewalls.

Inner wheel arch liners fitted obscuring some components/prescribed areas

Nearside Rear Tyre worn close to legal limit/worn on edge Close to limit and worn on edges (5.2.3 (e))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive Centre outer sill corroded beneath underseal. UNABLE TO DETECT FAILABLE HOLES WITH CORROSION ASSESSMENT TOOL AT TIME OF TEST. (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge Close to limit and worn on edges (5.2.3 (e))

Oil leak, but not excessive Engine (8.4.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Front chassis rails corroded in places (5.3.6 (a) (i))

Windscreen damaged but not adversely affecting driver's view Chips (3.2 (a) (i))

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Upper Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

Oil leak ()

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front Exhaust system not adequately supported (7.1.1)

Offside Brake cable insecure (3.5.1d)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Upper Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

Oil leak ()

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Exhaust has a minor leak of exhaust gases backbox (7.1.2)

Oil leak engine ()

Exhaust corroded

Nearside Play in track rod

Oil around engine and sump

Oil leak

Play in steering rack inner joint(s)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Oil leak

Play in steering rack inner joint(s)

Nearside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Oil leak

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Side repeater incorrect colour (1.4.A.2f)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Side repeater incorrect colour (1.4.A.2f)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Nail in nearside rear tyre

Nail in offside rear tyre

Nearside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Oil leak

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

exhaust coroaded

front coil springs coroaded

n/s/f tyre cut on outer sidewall

corrosion to exhaust

oil stain on engine

exhaust pipe clamp missing

exhaust surport bracket corroded

fuel tank straps corroded

rear exhaust silencer corroded

Driver's door does not latch securely closed (6.2.B.1a)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

exhaust pipe clamp missing

exhaust surport bracket corroded

fuel tank straps corroded

rear exhaust silencer corroded

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Brake pedal spongy (3.3.B.1b)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Shock absorber has an excessively worn shock absorber pivot (2.7.4)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Shock absorber has an excessively worn shock absorber pivot (2.7.4)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

front brakes release unevenly (3.7.B.4)