2006 Yamaha XT125

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Wheel alignment slightly misaligned. (2.5.1)

Front Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Headlamp incorrect colour (1.2.1)

Wheel alignment slightly misaligned. (2.5.1)

Rear Brake disc(s) slightly worn (3.2.A1l)

Steering movement slightly rough. (2.2.1a)

Rear reflector on motorcycle missing (1.4.1)

Rear wheel bearings have excessive free play (2.4.A.2c)

Drive chain worn to excess (6.2.1e)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front Direction indicators not working (1.5.1c)

Offside Front Front shock absorber seal failed and leaking oil (2.3.3)

Offside Rear Direction indicators not working (1.5.1c)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering movement slightly rough. (2.2.1a)

Exhaust slightly deteriorated (7.1.1a)

Nearside Front suspension assembly slightly corroded. (2.3.1)

Drive chain worn to excess (6.2.1e)

Nearside Front Footrest insecure (6.2.1a)

Offside Front Direction indicator not working (1.5.1c)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear suspension bearing has excessive free play (2.4.A2a(i))

Steering headbearing has excessive free play (2.2.2)

Stop lamp remains on when the brake is released (1.3.1e)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Exhaust slightly deteriorated (7.1.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Nearside Front Front suspension assembly slightly corroded. (2.3.1)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Registration plate with character(s) which are not the correct height (6.3.4a)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Drive chain sprocket slightly worn (6.2.1e)

Drive chain slightly loose (6.2.1d)

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Drive chain slightly loose (6.2.1d)

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

drive chain has tight links

Headlamp aim too low (1.6)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

drive chain has tight links