MOT Status
ExpiredMileage
144,457 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Lower Suspension arm corroded but not seriously weakened x2 n/s and o/s (5.3.3 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive strut mount area (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Rear Seat belt anchorage prescribed area is corroded but not considered excessive x2 n/s and o/s lower mounting areas (7.1.1 (a) (i))
Rear Suspension arm corroded but not seriously weakened arm/beam (5.3.3 (b) (i))
Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive x2 n/s and o/s shock/spring mount area (5.3.6 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Front Lower Suspension arm corroded but not seriously weakened x2 n/s and o/s (5.3.3 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive strut mount area (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Rear Seat belt anchorage prescribed area is corroded but not considered excessive x2 n/s and o/s lower mounting areas (7.1.1 (a) (i))
Rear Suspension arm corroded but not seriously weakened arm/beam (5.3.3 (b) (i))
Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive x2 n/s and o/s shock/spring mount area (5.3.6 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Play in steering rack inner joint(s) ()
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive spring mount (5.3.6 (a) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive spring mount (5.3.6 (a) (i))
Rear Suspension arm corroded but not seriously weakened arm/ beam (5.3.3 (b) (i))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge very close (5.2.3 (e))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Rear Tyre worn close to legal limit/worn on edge very close (5.2.3 (e))
Windscreen wiper blade defective x2 (3.4 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brakes imbalanced across an axle (3.7.B.5b)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Front coil spring broken (2.4.C.1a)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Headlamp damaged but light output not reduced (1.7.5a)
Offside Headlamp damaged but light output not reduced (1.7.5a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Front brake disc slightly pitted (3.5.1h)
Rear brake disc slightly pitted (3.5.1h)
both wipers split but still clesring screen
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Nissan Almera?
Based on 2,976,239 MOT tests across 231,560 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MM54 ABN is a 2005 Nissan Almera in Blue with a 1,497cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 78.3%.
Across all 2005 Nissan Almera models, the average MOT pass rate is 73.7% with a typical mileage of 58,958 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Nissan Almera fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 141,538 recorded failures. If you're considering buying MM54 ABN, it's worth having these areas checked by a mechanic before committing.
The Nissan Almera typically stays on UK roads for around 30 years. At 21 years old, this Nissan Almera is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of MM54 ABN?
You can check the full history of MM54 ABN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MM54 ABN registered?
MM54 ABN is a 2005 Nissan Almera, first registered on 5 January 2005.
Is MM54 ABN safe to buy?
The MOT history for MM54 ABN shows 23 tests with a 78.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MM54 ABN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MM54 ABN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.