MOT Status
ValidMileage
144,168 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Headlamp has a product on the lens but not seriously reducing light output BOTH (4.1.4 (b))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Direction indicator flashing less than 60 times a minute (4.4.4 (a))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Direction indicator flashing less than 60 times a minute (4.4.4 (a))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Tyre obviously under inflated (5.2.3 (l))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
general corrosion underneath
All direction indicators not working (4.4.1 (a) (ii))
Hazard warning lamps inoperative (4.4.1 (e))
Hazard warning switch inoperative (4.4.2 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end inner arch (5.3.6 (a) (i))
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill multiple holes the length of the sill (5.3.6 (a) (i))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Rear Brake cable insecure (1.1.15 (c))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end (5.3.6 (a) (i))
Rear Service brake imbalanced across an axle osr problem (1.2.1 (b) (i))
Rear Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Brake servo damaged but function not impaired corroded (1.1.3 (e))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Hazard warning tell-tale inoperative (4.9.1 (a) (i))
Headlamp lens slightly defective both sides (4.1.1 (b) (i))
Indicator tell-tale inoperative (4.9.1 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both sides (5.1.2 (b) (i))
underside of vehicle has all over corrosion on floor pans and inner sills
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Front Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Headlamp aim projected beam image is obviously incorrect Both (4.1.2 (c))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor (7.1.1 (a) (i))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Both inner sills corroded
Both outer sills corroded
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both (5.3.4 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt Both (2.1.3 (g) (i))
Nearside Front Nail in tyre ()
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Coil spring corroded Both (5.3.1 (b) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Various underbody areas and components heavily corroded
Fuel cap/sealing device component leaking (6.1.3 (b) (i))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan (7.1.1 (a) (i))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Front subframe corroded
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Nail in tyre ()
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Various underbody corrosion
Headlamp aim projected beam image is obviously incorrect Both (4.1.2 (c))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Various underbody corrosion
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
general under vehicle corrosion
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
general under vehicle corrosion
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Tyre slightly damaged/cracking or perishing all tyres (5.2.3 (d) (ii))
head lamp pattern slightly blurred
Items removed from driver's view prior to test phone holder and air freshener ()
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
fuel tank neck corroded may interfere with sealing arrangement
general surface corrosion to underbody
Items removed from driver's view prior to test ()
Nearside Rear wheel bearing has slight play (2.6.2)
fuel filler neck corroded may affect sealing arrangement
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Rear fog lamp not working (1.3.2b)
Items removed from driver's view prior to test ()
Nearside Rear wheel bearing has slight play (2.6.2)
Nearside headlamp aim on lower limit
fuel filler neck corroded may affect sealing arrangement
Fuel filler neck corroding may affect fuel cap sealing arrangement
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Oil leak ()
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Brake pipe slightly corroded (3.6.B.2c)
Offside Front Front position lamp(s) not working (1.1.A.3b)
n/s front tyre slightly worn on outer edge
n/s front tyre slightly worn on outer edge
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nail in offside rear tyre
Nearside Inner Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Inner Rear Brake pipe slightly corroded (3.6.B.2c)
FRONT BUMPWR SLIGHTLY DAMAGE
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pad(s) wearing thin (3.5.1g)
spare tyre flat
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MM55 BZN is a 2005 Peugeot 107 in Grey with a 998cc petrol engine. This vehicle has been through 27 MOT tests with a personal pass rate of 63%.
Across all 2005 Peugeot 107 models, the average MOT pass rate is 71.9% with a typical mileage of 58,548 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying MM55 BZN, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 21 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of MM55 BZN?
You can check the full history of MM55 BZN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MM55 BZN registered?
MM55 BZN is a 2005 Peugeot 107, first registered on 30 November 2005.
Is MM55 BZN safe to buy?
The MOT history for MM55 BZN shows 27 tests with a 63% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MM55 BZN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MM55 BZN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.