MOT Status
ExpiredMileage
130,615 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Hazard warning lamps inoperative (4.4.1 (e))
Hazard warning switch inoperative (4.4.2 (a) (ii))
Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axel mounting (5.3.6 (a) (i))
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))
Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axel mounting (5.3.6 (a) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i))
Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Exhaust mounting defective (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Suspension arm pin or bush worn but not resulting in excessive movement both front rear (5.3.4 (a) (i))
under body corroded
Hazard warning switch inoperative (4.4.2 (a) (ii))
Nearside Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded on outside + inner (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i))
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded on outside + inner (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Central Exhaust mounting defective (6.1.2 (a))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Tyre slightly damaged/cracking or perishing ALL 4 perished and cracking (5.2.3 (d) (ii))
underbody has corrosion
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))
Hazard warning switch inoperative (4.4.2 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill, outer sill, inner arch and chassis adjacent to axle mount (5.3.6 (a) (i))
Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill corroded (7.1.1 (a) (i))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer body sill and chassis adjacent to axle mount (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage fractured (5.3.3 (b) (ii)) DANGEROUS
Central Exhaust mounting defective (6.1.2 (a))
Headlamp lens slightly defective Both (4.1.1 (b) (i))
Tyre slightly damaged/cracking or perishing All four (5.2.3 (d) (ii))
Central Exhaust mounting defective (6.1.2 (a))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Central Exhaust mounting defective (6.1.2 (a))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Exhaust mounting defective (6.1.2 (a))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
slight oil leak from driveshaft oil seal
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
suspect slight exhaust gas leak at cat convertor (behind bracket)
Offside Brake pipe excessively corroded front to rear (1.1.11 (c))
Rear Exhaust silencer insecure (8.1.1 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
suspect slight exhaust gas leak at cat convertor (behind bracket)
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Central Rear Brake pipe corroded, covered in grease or other material offside into flexy hose (1.1.11 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Front Registration plate inscription illegible (0.1 (b))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Both rear shock absorbers corroded
Brake pipe corroded, covered in grease or other material Front to OSR (1.1.11 (c))
Exhaust system corroded
Tyre worn close to legal limit/worn on edge Both front (5.2.3 (e))
Both headlamps deteriorated
Brake pipe slightly corroded Front to osr (3.6.B.2c)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front number plate damaged but can still be read
Stop lamp has light sources not illuminating, but not more than 50% High level (1.2.1b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MM55 SUX is a 2006 Toyota Aygo in Grey with a 998cc petrol engine. This vehicle has been through 28 MOT tests with a personal pass rate of 64.3%.
Across all 2006 Toyota Aygo models, the average MOT pass rate is 73.6% with a typical mileage of 60,291 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying MM55 SUX, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 20 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of MM55 SUX?
You can check the full history of MM55 SUX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MM55 SUX registered?
MM55 SUX is a 2006 Toyota Aygo, first registered on 30 January 2006.
Is MM55 SUX safe to buy?
The MOT history for MM55 SUX shows 28 tests with a 64.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MM55 SUX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MM55 SUX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.