2005 Kia Picanto

Exhaust has a minor leak of exhaust gases back box (6.1.2 (a))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside registration bulb inoperative

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Coil spring corroded both rear coil springs (5.3.1 (b) (i))

Exhaust has a minor leak of exhaust gases back box (6.1.2 (a))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Headlamp aim too high (4.1.2 (a))

Nearside registration bulb inoperative

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Coil spring corroded both rear coil springs (5.3.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Bonnet primary retaining device slightly deteriorated bonnet damage but secure (3.1 (c))

Nearside Front Tyre worn close to legal limit/worn on edge Worn on inner edge (5.2.3 (e))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Emissions unable to be completed (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Bonnet primary retaining device slightly deteriorated bonnet damage but secure (3.1 (c))

Nearside Front Tyre worn close to legal limit/worn on edge Worn on inner edge (5.2.3 (e))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake fluid significantly below minimum mark (1.1.10 (d) (ii))

Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Nearside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i))

Corrosion to outersills

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Corrosion to outersills

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Corrosion to outersills

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))

Offside Rear Tyre worn close to legal limit/worn on edge worn smooth on inner (5.2.3 (e))

brake pedal anti slip worn

offside front wheel speed ring broken

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Side repeater incorrect colour (4.4.3 (a))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Offside Side repeater incorrect colour (4.4.3 (a))

Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))

Offside Rear Tyre worn close to legal limit/worn on edge worn smooth on inner (5.2.3 (e))

brake pedal anti slip worn

offside front wheel speed ring broken

Offside Rear lamp damaged

Offside Rear tyre worn on inner edge

engine management light on dash

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Headlamp aim too low (1.8)

Offside Front Headlamp aim too high (1.8)

Offside Rear lamp damaged

Offside Rear tyre worn on inner edge

engine management light on dash

exhaust system slightly corroded

Emissions not tested due to leak (7.3.A.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside front parking (secondary) brake grabbing severely (3.7.B.6b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too far to the left (1.8)

Offside Front Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

Nearside Headlamp aim too low (1.8)

Offside Front Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

Offside Headlamp aim too low and too far to the left. (1.8)

Nearside Rear fog lamp emits a light other than red (1.3.2e)

Offside Rear fog lamp emits a light other than red (1.3.2e)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)