MOT Status
ValidMileage
163,687 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Front Oil leak, but not excessive (8.4.1 (a) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Driver's seat with a defective structure (6.2.5 (a) (i))
Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Central Front Oil leak, but not excessive (8.4.1 (a) (i))
Central Front Oil leak, but not excessive rear of engine (8.4.1 (a) (i))
Rear Suspension arm corroded but not seriously weakened axle beam n/s and o/s (5.3.3 (b) (i))
Central Front Brake pipe excessively corroded master cylinder to abs pump (at abs pump) (1.1.11 (c))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))
Offside Rear Service brake excessively fluctuating (1.2.1 (e))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Central Front Oil leak, but not excessive rear of engine (8.4.1 (a) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Suspension arm corroded but not seriously weakened axle beam n/s and o/s (5.3.3 (b) (i))
Central Front Brake pipe corroded, covered in grease or other material ABS supply pipe (1.1.11 (c))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Central Front Brake pipe corroded, covered in grease or other material ABS supply pipe (1.1.11 (c))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Brake pipe corroded, covered in grease or other material ABS pump to flexi (1.1.11 (c))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Brake pipe corroded, covered in grease or other material master cylinder to ABS pump (1.1.11 (c))
Horn not working (7.7 (a))
Nearside Front Play in steering rack inner joint(s)
Offside Front Play in steering rack inner joint(s)
Nearside Front Sub-frame pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Rear reflector missing (4.8.2 (a) (ii))
Offside Front Sub-frame pin or bush excessively worn (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
offside rear tyre worn on outer edge
How Reliable is the Vauxhall Vivaro?
Based on 3,853,716 MOT tests across 280,649 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MM60 CNC is a 2011 Vauxhall Vivaro in White with a 1,995cc diesel engine. This vehicle has been through 18 MOT tests with a personal pass rate of 72.2%.
Across all 2011 Vauxhall Vivaro models, the average MOT pass rate is 66.5% with a typical mileage of 106,219 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Vauxhall Vivaro fails its MOT is track rod end ball joint has excessive play, accounting for 144,341 recorded failures. If you're considering buying MM60 CNC, it's worth having these areas checked by a mechanic before committing.
The Vauxhall Vivaro typically stays on UK roads for around 24 years. At 15 years old, this Vauxhall Vivaro is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of MM60 CNC?
You can check the full history of MM60 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MM60 CNC registered?
MM60 CNC is a 2011 Vauxhall Vivaro, first registered on 28 February 2011.
Is MM60 CNC safe to buy?
The MOT history for MM60 CNC shows 18 tests with a 72.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MM60 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MM60 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.