2007 Mazda 6

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated front arm (5.3.4 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated front arm (5.3.4 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill jacking point (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill jacking point (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Emissions not tested (8.2.1.2 (d))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan (7.1.1 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill jacking point (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill jacking point (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive wheel arch around top mount (5.3.6 (a) (i))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive wheel arch around top mount (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Nearside Rear Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Rear Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive wheel arch around top mount (5.3.6 (a) (i))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive wheel arch around top mount (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis to floor (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill to floor (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis to floor (5.3.6 (a) (i))

Offside Rear Suspension component mounting repair covered in underseal inner sill to floor (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

sill covers fitted

vehicle has light crosion on body and suspension components due to age

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Oil leak diff ()

Rear diff bushes worn

Nearside Front Lower Radius arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Oil leak diff ()

Rear diff bushes worn

Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Exhaust has a minor leak of exhaust gases rear y junction (7.1.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt rear arm (2.4.G.2)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Exhaust has a minor leak of exhaust gases rear y junction (7.1.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Headlamp aim too low (1.8)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt rear arm (2.4.G.2)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Headlamp aim too low (1.8)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Parking brake lever has little reserve travel (3.1.6b)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear rear brake binding (3.7.B.1)

Front registration plate faded but not likely to be misread (6.3.1d)

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

front brake discs lipped

rear brake discs pitted