2005 Toyota MR2

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Mudguard insecure ()

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Handbrake travel a little high

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords outer side wall (5.2.3 (d) (i))

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords both side walls (5.2.3 (d) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Outer Anti-roll bar linkage ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Handbrake travel a little high

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords outer side wall (5.2.3 (d) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords both side walls (5.2.3 (d) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Outer Anti-roll bar linkage ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))

Windscreen wiper blade defective both split- clears screen (3.4 (b) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. Imbalanced (1.2.1 (b) (i))

Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Offside Rear Mechanical brake component has restricted free movement park brake cable seized (3.5.1k)

Offside Rear Parking brake recording little or no effort (3.7.D.3a)

Parking brake lever has no reserve travel (3.1.6b)

engine management light on

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has a minor leak of exhaust gases flexy exhaust pipes slight deterioration (7.1.2)

advise handbrake travel

n/s handbrake performance lower than o/s

slight play in steering rack

Exhaust has a minor leak of exhaust gases flexy exhaust pipes slight deterioration (7.1.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

advise handbrake travel

n/s handbrake performance lower than o/s

slight play in steering rack

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)