MOT Status
ValidMileage
152,479 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Coil spring corroded all 4 front and rear (5.3.1 (b) (i))
Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Suspension component corroded but not seriously weakened trailing arm (5.3.3 (b) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Suspension component corroded but not seriously weakened trailing arm (5.3.3 (b) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Shock absorber corroded all four front and rear
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords nail in the tyre as well (5.2.3 (d) (i))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Rear Registration plate insecure (0.1 (a))
Coil spring corroded all 4 front and rear (5.3.1 (b) (i))
Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Suspension component corroded but not seriously weakened trailing arm (5.3.3 (b) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Suspension component corroded but not seriously weakened trailing arm (5.3.3 (b) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Shock absorber corroded all four front and rear
Both Front Shock Absorbers Corroded
Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Suspension component pin or bush slightly worn Trailing Arm (5.3.4 (a) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Suspension component pin or bush slightly worn Trailing Arm (5.3.4 (a) (i))
Both front shocks corroded
Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm (5.3.4 (a) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm (5.3.4 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear diff carrier mounting fluid filled bush damp
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sil (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sil (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Upper shock mounting area (5.3.6 (a) (i))
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sil (5.3.6 (a) (i))
Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sil (5.3.6 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
both front shock corroded
rear diff carrier fluid filled bush damp
Anti-roll bar corroded but not seriously weakened front (5.3.3 (b) (i))
Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Nearside Rear trailing arn bushes worn and perrished
Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Sub-frame corroded but not seriously weakened front (5.3.3 (b) (i))
front shock absorbers rusty
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Anti-roll bar corroded but not seriously weakened front (5.3.3 (b) (i))
Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Nearside Rear trailing arn bushes worn and perrished
Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Sub-frame corroded but not seriously weakened front (5.3.3 (b) (i))
front shock absorbers rusty
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Front beam pattern poor
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Front Exhaust Joint Corroded
Nearside Beam Pattern Poor
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Rear Suspension component pin or bush slightly worn Trailing Arm (5.3.4 (a) (i))
Offside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Offside Rear Suspension component pin or bush slightly worn Trailing Arm (5.3.4 (a) (i))
Rear Differential mount worn
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Spare Wheel Well (6.1.1 (c) (i))
Tyre worn close to legal limit/worn on edge All Tyres Front And Rear (5.2.3 (e))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))
Front Exhaust Joint Corroded
Nearside Beam Pattern Poor
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Rear Suspension component pin or bush slightly worn Trailing Arm (5.3.4 (a) (i))
Offside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Offside Rear Suspension component pin or bush slightly worn Trailing Arm (5.3.4 (a) (i))
Rear Differential mount worn
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Spare Wheel Well (6.1.1 (c) (i))
Tyre worn close to legal limit/worn on edge All Tyres Front And Rear (5.2.3 (e))
Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
exhaust weak
offside rear exhaust box 1 of 2 exhaust mounting rubbers broken/split.
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
rear subframe corroded
Nearside Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
rear subframe corroded
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake caliper has restricted free movement (3.5.1k)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front constant velocity joint is insecure (2.5.C.1b)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Stop lamp not working (1.2.1b)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Headlamp aim too low (1.8)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Anti-roll bar ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Anti-roll bar ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Rear Anti-roll bar ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside front brake juddering slightly (3.7.A.2b)
Offside front brake juddering slightly (3.7.A.2b)
How Reliable is the Subaru Outback?
Based on 130,193 MOT tests across 11,131 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MS51 NEN is a 2004 Subaru Outback in Silver with a 3,000cc petrol engine. This vehicle has been through 29 MOT tests with a personal pass rate of 65.5%.
Across all 2004 Subaru Outback models, the average MOT pass rate is 74.2% with a typical mileage of 92,302 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Subaru Outback fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,791 recorded failures. If you're considering buying MS51 NEN, it's worth having these areas checked by a mechanic before committing.
The Subaru Outback typically stays on UK roads for around 23 years. At 22 years old, this Subaru Outback is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of MS51 NEN?
You can check the full history of MS51 NEN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MS51 NEN registered?
MS51 NEN is a 2004 Subaru Outback, first registered on 2 July 2004.
Is MS51 NEN safe to buy?
The MOT history for MS51 NEN shows 29 tests with a 65.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MS51 NEN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MS51 NEN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.