2005 Fiat Punto

Central Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Emissions unable to be completed (8.2.1.2 (d))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Front subframe mounting area (rear) (5.3.6 (a) (i))

Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Offside Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Power steering malfunctioning (2.1.5 (a))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Emissions not tested engine noise at specified rpms (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (8.1.1 (a))

Offside Rear Brake pipe excessively corroded to flexi hose as marked (1.1.11 (c))

Offside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b))

Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))

Offside Rear Rear fog lamp adversely affected by the operation of another lamp (4.5.4 (b))

Offside Rear Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b))

Rear silencer missing

bonnet release lever broken

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Inner Brake disc contaminated (1.1.14 (b))

Horn not working (7.7 (a) (ii))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

handbrake hard to pull,will req attention

Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (8.1.1 (a))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Outer Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Outer Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Front Brake pad(s) wearing thin both (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

Nearside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Emissions not tested (7.0)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)