2005 Citroen Xsara

All direction indicators slightly discoloured (4.4.3 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Emissions unable to be completed due to exhaust got major leak (8.2.2.2 (e))

Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Brake pipe excessively corroded flexi to cylinder (1.1.11 (c))

Rear Exhaust has a major leak of exhaust gases BOX (6.1.2 (a))

All direction indicators slightly discoloured (4.4.3 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Front Outer Integral body structure is fractured but structural rigidity is not significantly reduced sill (6.1.1 (a) (i))

Nearside Front Outer Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Rear Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Front Outer Integral body structure is fractured but structural rigidity is not significantly reduced sill (6.1.1 (a) (i))

Nearside Front Outer Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)

both front tyres worn inner edges

Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive outer sill weak (5.2.6)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Track rod end ball joint has slight play (2.2.B.1f)

Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear Exhaust system not adequately supported (7.1.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)