MOT Status
ExpiredMileage
60,103 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame (5.3.6 (a) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))
Nearside Front Inner Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS
Nearside Rear Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS
Offside Front Inner Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS
Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Inner Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS
Offside Front Inner Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS
Windscreen has damage to an area less than a 40mm circle outside zone 'A' Large Crack (8.3.1d)
Offside Rear Tyre worn close to the legal limit @ 2.46mm (4.1.E.1)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Offside Inner Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Inner Front Tyre worn close to the legal limit (4.1.E.1)
cut in o/s rear tyre wall.
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside front brake binding (3.7.B.1)
Offside front brake binding (3.7.B.1)
Nearside Inner Front Tyre worn close to the legal limit (4.1.E.1)
cut in o/s rear tyre wall.
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside rear tyre worn around outer side wall.
Offside front tyre worn on inner edge close to cords.
Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)
Nearside Headlamp aim too low (1.8)
Nearside Rear Road wheel bead rim badly distorted (4.2.A.1a)
Offside Headlamp aim too high (1.8)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MT06 AKG is a 2006 Ford Ka in Silver with a 1,599cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 69.2%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying MT06 AKG, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of MT06 AKG?
You can check the full history of MT06 AKG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MT06 AKG registered?
MT06 AKG is a 2006 Ford Ka, first registered on 13 June 2006.
Is MT06 AKG safe to buy?
The MOT history for MT06 AKG shows 26 tests with a 69.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MT06 AKG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MT06 AKG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.