MOT Status
ExpiredMileage
75,952 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Child Seat fitted not allowing full inspection of adult belt ()
Nearside Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Driver's door cannot be opened from outside the vehicle (6.2.3 (a))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Child Seat fitted not allowing full inspection of adult belt ()
Nearside Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
child seat fitted
corrosion to n/s and o/s front chassis
corrosion to n/s and o/s front subframe attachment brackets
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Rear coil spring broken (2.4.C.1a)
Offside Rear coil spring broken (2.4.C.1a)
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
child seat fitted
corrosion to n/s and o/s front chassis
corrosion to n/s and o/s front subframe attachment brackets
Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)
Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)
Offside Front Vehicle structure has slight corrosion chassis (6.1.A.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
child seat fitted
Nearside Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Offside Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Under-trays fitted obscuring some underside components
o/s rear axle mounting bush (wear and movement)
Oil leak
Play in steering rack inner joint(s)
n/s/f anti roll bar link rubbing inner wing on full lock
Nearside Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)
Oil leak
Play in steering rack inner joint(s)
n/s/f anti roll bar link rubbing inner wing on full lock
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
power steering pipe (corrosion)
Nearside Front Anti-roll bar linkage insecure (2.4.G.1) DANGEROUS
power steering pipe (corrosion)
Nearside Front coil spring fractured (2.4.C.1a) DANGEROUS
Offside Front coil spring fractured (2.4.C.1a) DANGEROUS
Nearside Front coil spring fractured (2.4.C.1a)
Offside Front coil spring fractured (2.4.C.1a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Spare tyre defective
brake pedal slightly spongy
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MT06 UZK is a 2006 Ford Ka in Red with a 1,299cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 57.9%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying MT06 UZK, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of MT06 UZK?
You can check the full history of MT06 UZK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MT06 UZK registered?
MT06 UZK is a 2006 Ford Ka, first registered on 29 June 2006.
Is MT06 UZK safe to buy?
The MOT history for MT06 UZK shows 19 tests with a 57.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MT06 UZK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MT06 UZK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.