MOT Status
ValidMileage
54,854 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Road wheel slightly distorted inner rim (5.2.2 (c) (i))
rear axle bushes deteriorating
Nearside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Front Road wheel slightly distorted inner rim (5.2.2 (c) (i))
rear axle bushes deteriorating
Power steering component has slight seepage from a component (2.1.5 (a))
Power steering fluid level below minimum (2.1.5 (b) (i))
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Power steering component has slight seepage from a component (2.1.5 (a))
Power steering fluid level below minimum (2.1.5 (b) (i))
rear axle and suspension mounts rusty
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
rear axle and suspension mounts rusty
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Headlamp aim too far to the right (4.1.2 (a))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Rear Tyre has ply or cords damaged outer wall (5.2.3 (d) (ii))
both rear tyres wearing on outer edge and slight perrishing
Rear fog lamp not working (1.3.2b)
both rear tyres wearing on outer edge and slight perrishing
both front tyres wearing on inner edge
both rear tyres perishing in outer wall
slight corrosion on front suspension mounts
Nearside Front Headlamp aim beam image obviously incorrect main beam (1.8.A.1b)
both front tyres wearing on inner edge
both rear tyres perishing in outer wall
slight corrosion on front suspension mounts
Rear fog lamp not working (1.3.2b)
front tyres split and perrished
rear tyres worn low on the inner edges
o/s/f tyre perrished and starting to split on the outer side wall
tyres cracking
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MT06 YXY is a 2006 Ford Ka in Blue with a 1,599cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 68%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying MT06 YXY, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of MT06 YXY?
You can check the full history of MT06 YXY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MT06 YXY registered?
MT06 YXY is a 2006 Ford Ka, first registered on 16 June 2006.
Is MT06 YXY safe to buy?
The MOT history for MT06 YXY shows 25 tests with a 68% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MT06 YXY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MT06 YXY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.