2009 Ford Ka

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

rear axle has been welded on bottom spring cups

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

rear axle has been welded on bottom spring cups

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Exhaust mounting defective (6.1.2 (a))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Rear Lower Integral body structure is repaired but structural rigidity is not significantly reduced axle (6.1.1 (d) (i))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength shock mounting to rear axle corroded seriously reducing overall strength of shock mounting (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength spring cup excessively corroded (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases back box exhaust leak (6.1.2 (a))

Exhaust has a minor leak of exhaust gases front flexi exhaust leak (6.1.2 (a))

Front Exhaust mounting defective front exhaust mount broken (6.1.2 (a))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear exhaust box outer casing pealing

Sub-frame corroded but not seriously weakened NSR and OSR cups on subframe corroded and slightly holed but not structure not seriously reduced (5.3.3 (b) (i))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear exhaust box outer casing pealing

Sub-frame corroded but not seriously weakened NSR and OSR cups on subframe corroded and slightly holed but not structure not seriously reduced (5.3.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear exhaust box outer casing corroded

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

rear exhaust box outer casing corroded

Front Exhaust has a minor leak of exhaust gases exhaust flexi (6.1.2 (a))

Front wipers smearing screen

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear exhaust box outer casing corroded

Rear exhaust corroded

Suspension arm pin or bush worn but not resulting in excessive movement both sides rearmost bush (5.3.4 (a) (i))

rear exhaust outer skin corroded

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)