2006 Volvo S40

Front Headlamp has a product on the lens but not seriously reducing light output Both sides. (4.1.4 (b))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Coil spring corroded Both sides. (5.3.1 (b) (i))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Headlamp has a product on the lens but not seriously reducing light output Both sides. (4.1.4 (b))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Coil spring corroded Both sides. (5.3.1 (b) (i))

Corrosion underneath.

Front Headlamps hazy.

Front Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Tyre worn close to legal limit/worn on edge Both sides. (5.2.3 (e))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Upper Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Rear Coil spring corroded Both sides. (5.3.1 (b) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Headlamp aim too low (4.1.2 (a))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect bulb is also dim (4.1.2 (c))

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Items removed from driver's view prior to test dash cam ()

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated small split (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Inner Tyre worn close to legal limit/worn on edge Both (5.2.3 (e))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front tyre worn on inner edge

Rear Brake pad(s) wearing thin (3.5.1g)

Suspension arm rubber mounting deteriorated but not resulting in excessive movement both front rear bushes (2.4.G.2)

Front Exhaust mount bracket broken

front brake pads getting low

front suspension arm rear bushes worn

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

front brake pads getting low

front suspension arm rear bushes worn

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)