2014 Peugeot 208

Suspension component mounting prescribed area is corroded but not considered excessive various front to rear (5.3.6 (a) (i))

Electronic power steering warning lamp indicates a system malfunction (2.6 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Exhaust fumes entering cabin (6.1.2 (b) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Tyre pressure monitoring system malfunctioning or obviously inoperative (5.2.3 (h))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive various front to rear (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive rear axle (5.3.6 (a) (i))

Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive rear axle (5.3.6 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive rear axle (5.3.6 (a) (i))

Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive rear axle (5.3.6 (a) (i))

Brake lever has insufficient reserve travel (1.1.2 (a))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Rear Exhaust system insecure (6.1.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Exhaust system insecure both front and rear (6.1.2 (a))

Front Brake disc in such a condition that it is seriously weakened both sides (1.1.14 (a) (ii)) DANGEROUS

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Reversing lamp inoperative (4.6.1 (a))

Speedometer cannot be illuminated (7.8 (c) (ii))

Nearside Non obligatory mirror damaged ()

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Reversing lamp insecure (4.6.1 (c) (i))

Reversing lamp insecure (4.6.1 (c) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front Headlamp aim too low (1.8)

Offside Front Tyre worn close to the legal limit (4.1.E.1)