2003 Aprilia RS125R

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Steering headbearing has slight free play (2.2.2 (f) (i))

Front Stop lamp not working (4.3.1 (a) (ii))

Horn not working (7.7 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Steering headbearing has slight free play (2.2.2 (f) (i))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Rear rear brake not working

Drive chain excessively loose (6.1.7 (c) (i))

Drive chain sprocket excessively loose (6.1.7 (c) (i))

Front Brake lever has insufficient reserve travel (1.1.2 (a))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Headlamp aim too low (4.1.2 (a))

Horn not working (7.7 (a) (ii))

Nearside Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) DANGEROUS

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Drive chain sprocket worn, but not excessively sprocket carrier bearing or cush drive rubbers worn (6.1.7 (c) (i))

Exhaust has a minor leak of exhaust gases silencer (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Motorcycle structure is corroded but structural rigidity is not significantly reduced exhaust (6.1.1 (c) (i))

Fairings insecure but not likely to impede the steering (2.1.2e)

Rear Brake pedal pivots slightly worn (3.1.3a)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Drive chain excessively loose (6.2.1d)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front wheel bearings are excessively rough (2.3.5b)

Nearside Front Direction indicators not working (1.5.1c)

Offside Front Direction indicator incorrect colour (1.5.1b)

Rear Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Rear Brake pedal has inadequate reserve travel (3.1.3b)

Rear Rear suspension component loose rear swing arm pivot bolt nut missing (2.4.A.1a)

Fairings insecure but not likely to impede the steering (2.1.2e)

Rear Brake pedal pivots slightly worn (3.1.3a)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Horn not working (1.7.3a)

Offside Rear Direction indicators not working (1.5.1c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front tyre perished

Nearside Fairings insecure but not likely to impede the steering (2.1.2e)

Offside Fairings insecure but not likely to impede the steering (2.1.2e)

Offside Rear Brake fluid reservoir fluid level low (3.2.B1d)

Rear Tyre worn close to the legal limit (4.1.3(i))

Slight play in rear shock linkage.

Nail in rear tyre

Front Front wheel bearings are excessively rough (2.3.5b)

Front Headlamp aim too low (1.6)

Nearside Rear Brake hose excessively chafed (3.2.B3a) DANGEROUS

Offside Rear Brake master cylinder insecurely mounted (3.2.B1a) DANGEROUS

Rear Rear reflector on motorcycle obscured (1.4.1) DANGEROUS

Front tyre perished

Nearside Fairings insecure but not likely to impede the steering (2.1.2e)

Offside Fairings insecure but not likely to impede the steering (2.1.2e)

Rear Tyre worn close to the legal limit (4.1.3(i))

Rear mudguard assembly insecure

Slight play in rear shock linkage.

Nail in rear tyre

Rear brake reservoir insecure.

Front Brake pad(s) close to minimum limit (3.2.A1f(i))