2005 Fiat Ducato

vehicle fully under sealed including brake pipes

Exhaust system insecure 3 x exhaust rubber hanger broken (4 fitted) (6.1.2 (a))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

vehicle fully under sealed including brake pipes

Brake pipe corroded, covered in grease or other material undersealed (1.1.11 (c))

under-side of vehicle fully undersealed

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Brake pipe corroded, covered in grease or other material undersealed (1.1.11 (c))

under-side of vehicle fully undersealed

Brake hose has slight corrosion to ferrule ALL BRAKE HOSE FERRULES (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material ALL BRAKE PIPES (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security subframe mount (6.2.2 (d) (i))

Rear Brake load sensing valve stiff (1.1.17 (c) (ii))

Exhaust emissions exceed manufacturer's specified limit 1.21 (8.2.2.2 (a))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Exhaust system insecure rubber mounts broken (6.1.2 (a))

Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security subframe mount (6.2.2 (d) (i))

Oil leak, but not excessive sump plug (8.4.1 (a) (i))

Rear Brake load sensing valve stiff (1.1.17 (c) (ii))

Front Coil spring corroded Both front... (5.3.1 (b) (i))

Nearside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced Corroded leg, solid at time of test... (6.1.1 (c) (i))

Offside Front Headlamp aim, only just readable... Needs attention soon

general underbody corrosion

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))

Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Central Exhaust mounting defective both mount cracked (6.1.2 (a))

general underbody corrosion

both front inner wheel arches rusty

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

front cross member corroded

slight roughness to offside front wheel bearing

Nearside rear brake binding (3.7.B.1)

Offside rear brake binding (3.7.B.1)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

front cross member corroded

slight roughness to offside front wheel bearing

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Nearside rear brake binding (3.7.B.1)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)