MOT Status
ValidMileage
77,788 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
under body corrosion
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
under body corrosion
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear spring top seat (6.2.2 (d) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Inner Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Direction indicator slightly discoloured (4.4.3 (a))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Direction indicator slightly discoloured (4.4.3 (a))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Rear Coil spring corroded o/s and n/s (5.3.1 (b) (i))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Rear Coil spring corroded o/s and n/s (5.3.1 (b) (i))
Nearside Front Nail in tyre ()
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Brake pipe corroded, covered in grease or other material front to rear corroded (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Coolant leak at top hose to engine block area, needs investigating. ()
Nearside Front Tyre worn close to the legal limit tread depth at 3mm. 195/50/15. (4.1.E.1)
Nearside Rear Body has slight corrosion by upper spring top seat area. (6.1.B.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Body has slight corrosion (6.1.B.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
battery tray corroding
exhaust back box brackets corroding and back box outer skin corroding
exhaust back box heat shield insecure
general light corrosion under vehicle
Nearside Rear Outer Tyre has a cut in excess of the requirements deep enough to reach the ply or cords side wall. 195/50/15. (4.1.D.1a)
Coolant leak at top hose to engine block area, needs investigating. ()
Nearside Front Tyre worn close to the legal limit tread depth at 3mm. 195/50/15. (4.1.E.1)
Nearside Rear Body has slight corrosion by upper spring top seat area. (6.1.B.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Body has slight corrosion (6.1.B.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
battery tray corroding
exhaust back box brackets corroding and back box outer skin corroding
exhaust back box heat shield insecure
general light corrosion under vehicle
Power steering component(s) leaking steering rack (2.3.3b)
Power steering fluid level below minimum (2.3.1)
How Reliable is the Mazda 2?
Based on 1,902,862 MOT tests across 147,013 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MV06 CWP is a 2006 Mazda 2 in Black with a 1,400cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 75%.
Across all 2006 Mazda 2 models, the average MOT pass rate is 76.5% with a typical mileage of 52,328 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 2 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 18,380 recorded failures. If you're considering buying MV06 CWP, it's worth having these areas checked by a mechanic before committing.
The Mazda 2 typically stays on UK roads for around 23 years. At 20 years old, this Mazda 2 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of MV06 CWP?
You can check the full history of MV06 CWP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MV06 CWP registered?
MV06 CWP is a 2006 Mazda 2, first registered on 6 April 2006.
Is MV06 CWP safe to buy?
The MOT history for MV06 CWP shows 24 tests with a 75% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MV06 CWP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MV06 CWP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.