MOT Status
ValidMileage
87,030 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Windscreen wiper blade defective (3.4 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Anti-roll bar linkage pin or bush excessively worn BOTH SIDES (5.3.4 (a) (i))
Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Emissions unable to be completed Exhaust leaking (8.2.1.2 (d))
Exhaust has a major leak of exhaust gases holed and corroded, front bracket not attached (6.1.2 (a))
Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Axle mounting (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner to outer sill (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Coil spring mounting corroded and seriously weakened Shock lower seat (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner to outer sill (5.3.6 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened x2 (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Front Shock absorbers has slight external damage to the casing Corroded (5.3.2 (b))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Shock absorbers has slight external damage to the casing Corroded (5.3.2 (b))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive Floor to sill (7.1.1 (a) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Shock absorbers has slight external damage to the casing Corroded (5.3.2 (b))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Axle mounting (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge also cracked/perished (5.2.3 (e))
Oil level low
Rear Suspension component corroded but not seriously weakened Axle beam (5.3.3 (b) (i))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Brake pipe excessively corroded both sides (1.1.11 (c))
Front Exhaust system insecure (6.1.2 (a))
Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sills/floors to outer sills [both sides] (6.1.1 (c) (i))
Nearside Brake pipe excessively corroded main pipe at rear (1.1.11 (c))
Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Fuel tank exhaust shield missing where fitted as original equipment creating a risk of fire (6.1.3 (e)) DANGEROUS
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Anti-roll bar pin or bush worn but not resulting in excessive movement Both front (5.3.4 (a) (i))
Nearside Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))
Vehicle structure is corroded but structural rigidity is not significantly reduced Under body and suspension components slightly corroded but not seriously affecting its strength (6.1.1 (c) (i))
Front Registration plate insecure but not likely to fall off (0.1 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Items removed from driver's view prior to test ()
Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Offside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Front Registration plate insecure but not likely to fall off (0.1 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Items removed from driver's view prior to test ()
Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Offside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Brake pipe slightly corroded O/S R
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Valve stem slightly damaged (5.2.3 (j))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
exhaust mountings corroded
Offside Brake pipe excessively corroded front to rear (1.1.11 (c))
Offside Rear Service brake lagging in operation (1.2.1 (d))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Valve stem slightly damaged (5.2.3 (j))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
exhaust mountings corroded
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded front to rear (3.6.B.2c)
Nearside Rear Brake pipe excessively corroded front to rear (3.6.B.2c)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
rear brake application uneven (3.7.B.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded front to rear (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Rear wheel bearing rough when rotated (2.6.1)
Rear rear brake application uneven (3.7.B.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Brake pipe slightly corroded (3.6.B.2c)
rear wiper blade split
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Items removed from driver's view prior to test
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Tyre worn close to the legal limit (4.1.E.1)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MV57 BJU is a 2008 Toyota Aygo in Blue with a 998cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 64%.
Across all 2008 Toyota Aygo models, the average MOT pass rate is 74.7% with a typical mileage of 54,541 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying MV57 BJU, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 18 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of MV57 BJU?
You can check the full history of MV57 BJU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MV57 BJU registered?
MV57 BJU is a 2008 Toyota Aygo, first registered on 25 February 2008.
Is MV57 BJU safe to buy?
The MOT history for MV57 BJU shows 25 tests with a 64% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MV57 BJU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MV57 BJU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.