2008 Alfa Romeo 159

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))

Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Both chassis legs (5.3.6 (a) (i))

Park brake only just met minimum efficiency requirement, further investigation recommended.

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Park brake only just met minimum efficiency requirement, further investigation recommended.

Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Both inner sills (5.3.6 (a) (i))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Both inner sills (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Both inner sills (5.3.6 (a) (i))

All under trays damaged

Nearside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Both chassis legs (5.3.6 (a) (i))

Nearside Front Headlamp levelling device inoperative link arm on top suspension arm missing (4.1.5 (a))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Exhaust has a minor leak of exhaust gases clamp deteriorated (6.1.2 (a))

Offside Rear Exhaust has a minor leak of exhaust gases clamp split (6.1.2 (a))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement nearside and offside "D" bush's perished (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Exhaust mounting defective rear exhaust clamp corroded (6.1.2 (a))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement nearside and offside "D" bush's perished (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Exhaust mounting defective rear exhaust clamp corroded (6.1.2 (a))

Rear hand brake travels to high

n/s and o/s front tyres worn on edge

Nearside Front Nail in tyre ()

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear coil spring broken (2.4.C.1a)

Nearside Front Nail in tyre ()

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Headlamp cleaning device inoperative (1.7.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

all tyres worn inner tread

headlamp washers not working at time of test

n/s/f tyre has a split to inner sidewall/tread not deep enough to expose cords though