2008 Ford Ka

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Headlamp aim too low (4.1.2 (a))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Brake hydraulic reservoir fluid level below minimum level (1.1.10 (d) (i))

Front Exhaust heat shield loose

Front Registration plate deteriorated but not likely to be misread cracked (0.1 (b))

Integral body structure is corroded but structural rigidity is not significantly reduced front to back sill corroded both ns and os (6.1.1 (c) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement axle bush (5.3.4 (a) (i))

Offside Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Offside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement axle bush (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Windscreen damaged but not adversely affecting driver's view crack ns to centre (3.2 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Items removed from driver's view prior to test ()

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Brake hose slightly twisted (1.1.12 (b) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Steering locking device missing split pin missing castle nut fitted (2.1.3 (d))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Central Heat shield loose

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Items removed from driver's view prior to test ()

Nearside Front Headlamp aim too high (4.1.2 (a))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Offside Front Brake hose slightly twisted (1.1.12 (b) (i))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive flooring (7.1.1 (a) (i))

Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive flooring (7.1.1 (a) (i))

Nearside Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Front Position lamp not working (4.2.1 (a))

Offside Front Lower Suspension arm pin or bush excessively worn rear (5.3.4 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive floor (7.1.1 (a) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive floor (7.1.1 (a) (i))

Offside Front Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement rear mounting (2.4.G.2)

Rear Exhaust system not adequately supported (7.1.1)

Offside Front Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement rear mounting (2.4.G.2)

Rear both rear tyres badly perishing

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Rear Registration plate lamp not working (1.1.C.1d)