2003 Mercedes-benz Vito

Body has slight corrosion (6.1.B.2)

Exhaust emits black smoke during acceleration (7.4.A2)

advise nearside inner wing corroded

advise offside inner wing corroded

front crossmember corroded

front number plate slightly distorted

master cylinder corroded

osf front spring corroded

rear brake pipes corrded at rear

slam panel corroded

Emissions not tested (7.0)

Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Inner Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Body has a projection caused by corrosion (6.1.C.1)

Nearside Front Headlamp aim too low (1.8)

Offside Body has a projection caused by corrosion (6.1.C.1)

Service brake: efficiency below requirements (3.7.B.7)

Body has slight corrosion (6.1.B.2)

Exhaust emits black smoke during acceleration (7.4.A2)

advise nearside inner wing corroded

advise offside inner wing corroded

front crossmember corroded

front crossmember corroded

front number plate slightly distorted

master cylinder corroded

osf front spring corroded

rear brake pipes corrded at rear

slam panel corroded

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Exhaust emits excessive smoke or vapour of any colour (7.4.B.4)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Stop lamp not working (1.2.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

front tyre valves slightly perished

offside rear brake hose slightly corroded

rear discsd corroded and pitted

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Headlamp excessively damaged so that the light output is severely reduced (1.7.5a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

n/s headlamp slightly damaged

Nearside Front Headlamp not in a clean condition but not affecting beam image (1.2.4a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Headlamp not in a clean condition but not affecting beam image (1.2.4a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

ns/osr shocker covers corroded

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Headlamp not in good working order but not adversely affecting beam image (1.2.4a)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

osr shocker dust cover insecure

Offside Front Headlamp not in good working order but not adversely affecting beam image (1.2.4a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

osr shocker dust cover insecure

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

osf headlamp cracked but not affecting light output

Nearside Rear Stop lamp not working (1.2.1b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

osf headlamp cracked but not affecting light output

Offside Front Headlamp not in good working order but not adversely affecting beam image (1.2.4a)