MOT Status
ExpiredMileage
79,022 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor pan (6.1.1 (c) (i))
Offside Headlamp aim too low (4.1.2 (a))
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))
Offside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced Sill (6.1.1 (d) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced Floor pan (6.1.1 (c) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced chassis leg (6.1.1 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced wing around fuel filler (6.1.1 (c) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced chassis leg (6.1.1 (c) (i))
Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))
Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
centre exhaust bracket broken
nearside headlight dim, moisture in light
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
centre exhaust bracket broken
nearside headlight dim, moisture in light
Front Brakes imbalanced across an axle (1.2.1 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/floor (7.1.1 (a) (i))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Central Exhaust mounting defective (6.1.2 (a))
Offside Headlamp aim too low (4.1.2 (a))
Front Suspension arm pin or bush worn but not resulting in excessive movement Both (5.3.4 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive Both front and nearside rear inner sills (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement Both (5.3.4 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive Both front and nearside rear inner sills (5.3.6 (a) (i))
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting next to lower arm (6.2.2 (d) (i))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Headlamp aim too low (4.1.2 (a))
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting by subframe connecting to body (6.2.2 (d) (i))
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting next to lower arm (6.2.2 (d) (i))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Headlamp aim too low (4.1.2 (a))
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill next to rear beam (6.2.2 (d) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security where exhaust mounts on to body (6.2.2 (d) (i))
clutch bearing noisy
Inner Seat belt anchorage prescribed area is corroded but not considered excessive sills (7.1.1 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Inner Seat belt anchorage prescribed area is corroded but not considered excessive sills (7.1.1 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Windscreen washer not working (3.5 (a))
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Stop lamp not working (1.2.1b)
All tyres 165/60/14,spare tyre155/70/13
Engine covers fitted obscuring some components in the engine bay
Under-trays fitted obscuring some underside components
Offside Headlamp not working on dipped beam (1.7.5a)
All tyres 165/60/14,spare tyre155/70/13
Engine covers fitted obscuring some components in the engine bay
Under-trays fitted obscuring some underside components
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MW08 NYM is a 2008 Ford Ka in Black with a 1,297cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 56%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying MW08 NYM, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of MW08 NYM?
You can check the full history of MW08 NYM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MW08 NYM registered?
MW08 NYM is a 2008 Ford Ka, first registered on 30 June 2008.
Is MW08 NYM safe to buy?
The MOT history for MW08 NYM shows 25 tests with a 56% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MW08 NYM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MW08 NYM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.