MOT Status
ExpiredMileage
97,042 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust has a minor leak of exhaust gases rear mounting area (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Road wheel slightly distorted (5.2.2 (c) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
exhaust system corroded
Nearside Brake pipe excessively corroded front to rear (at rear) (1.1.11 (c))
Nearside Rear Hydraulic brake cylinder excessively weakened by corrosion (1.1.16 (d) (i))
Offside Brake pipe excessively corroded front to rear (at rear) (1.1.11 (c))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Hydraulic brake cylinder excessively weakened by corrosion (1.1.16 (d) (i))
Exhaust has a minor leak of exhaust gases rear mounting area (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Road wheel slightly distorted (5.2.2 (c) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
exhaust system corroded
Exhaust mounting defective corroded (6.1.2 (a))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material to wheel cylinder (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Windscreen wiper blade defective (3.4 (b) (i))
exhaust corroded
Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material to wheel cylinder (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
exhaust hangers corroded
Offside Rear Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
rear exhaust clamp loose and minor leak of gases
Front Exhaust mounting defective (6.1.2 (a))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Hydraulic brake cylinder not excessive but advise adjustment (1.1.16 (e) (i))
Nearside Front Road wheel with a slightly distorted bead rim inner/outer bead rim damaged (4.2.A.1a)
corrosion on exhaust system
front suspension lower arm rear positioned rubber bushes perrishing
rust on underbody components
slight wear/fluffing on drivers seatbelt webbing
some uneven tread wear on rear tyres
Nearside Front Road wheel with a slightly distorted bead rim inner/outer bead rim damaged (4.2.A.1a)
Nearside Registration plate lamp not working (1.1.C.1d)
corrosion on exhaust system
front suspension lower arm rear positioned rubber bushes perrishing
rust on underbody components
slight wear/fluffing on drivers seatbelt webbing
some uneven tread wear on rear tyres
Offside Front Seat belt stitching slightly frayed (5.2.2b)
exhaust hangers weak
front brake discs poor
Exhaust metal hangers poor
Front brake discs inner faces have slight corrosion
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MW08 RBZ is a 2008 Toyota Aygo in Grey with a 998cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 83.3%.
Across all 2008 Toyota Aygo models, the average MOT pass rate is 74.7% with a typical mileage of 54,541 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying MW08 RBZ, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 18 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of MW08 RBZ?
You can check the full history of MW08 RBZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MW08 RBZ registered?
MW08 RBZ is a 2008 Toyota Aygo, first registered on 30 June 2008.
Is MW08 RBZ safe to buy?
The MOT history for MW08 RBZ shows 18 tests with a 83.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MW08 RBZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MW08 RBZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.