2003 Yamaha R6

Brake hose slightly deteriorated All brake hoses have alloy fittings (1.1.12 (b) (ii))

Exhaust noisy (8.1.1 (a))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Offside Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

All direction indicators adversely affected by the operation of another lamp Brake light (4.4.3 (b))

All direction indicators obviously incorrectly positioned Rear to close together (4.4.3 (a))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Nearside Front Shock absorber insecurely attached Top yoke bolt loose (5.3.2 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Rear reflector missing (4.8.2 (a) (ii))

Riders seat insecure (6.2.5 (a) (ii)) DANGEROUS

All direction indicators slightly affected by the operation of another lamp Rear light (4.4.3 (b))

Brake hose slightly deteriorated All brake hoses have alloy fittings (1.1.12 (b) (ii))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Offside Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Registration plate deteriorated but not likely to be misread Slightly pointing down (0.1 (b))

Registration plate lamp throwing direct white light to the rear Not positioned very well (4.7.1 (a))

Drive chain slightly tight (6.2.1d)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear seat missing

Steering control chaffing between components and not interfering with free movement of steering (2.1.2a)

Nearside Rear Footrest missing (6.2.1a)

Offside Rear Footrest missing (6.2.1a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain slightly tight (6.2.1d)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Steering control chaffing between components and not interfering with free movement of steering (2.1.2a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

fork yokes misaligned

Headlamp aim too high (1.6)

Rear Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Rear reflector on motorcycle missing (1.4.1)

Registration plate not fixed vertically, or as close to vertical as is reasonably practical (6.3.2b)

Steering headbearing has excessive free play (2.2.2)

Rear Tyre worn close to the legal limit (4.1.3(ii))

fork yokes misaligned

Exhaust noisy (7.1.2)

lights masked at time of test

Steering headbearing has slight free play (2.2.2)

seat has bolts missing but still secure

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Steering headbearing has slight free play (2.2.2)

seat has bolts missing but still secure