MOT Status
ValidMileage
146,023 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Suspension arm pin or bush worn but not resulting in excessive movement Both sides trailing arm bushes (5.3.4 (a) (i))
Registration plate deteriorated but not likely to be misread Front and rear (0.1 (b))
Fluid leak, but not excessive (8.4.1 (a) (i))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
unable to check n/s rear wheel bearing due to brake binding
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front All position lamps adversely affected by the operation of another lamp (4.2.3 (c))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front All position lamps adversely affected by the operation of another lamp (4.2.3 (c))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to floor (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Stop lamp(s) adversely affected by the operation of another lamp brings on both head lamps when peddle is pushed (4.3.3 (b))
Central Stop lamp(s) remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Fluid leak, but not excessive (8.4.1 (a) (i))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
unable to check n/s rear wheel bearing due to brake binding
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component pin or bush slightly worn front axle bush (5.3.4 (a) (i))
Offside Rear Suspension component pin or bush slightly worn front axle bush (5.3.4 (a) (i))
Nearside Brake pipe excessively corroded front to rear (1.1.11 (c))
Nearside Rear Suspension component pin or bush slightly worn front axle bush (5.3.4 (a) (i))
Offside Rear Suspension component pin or bush slightly worn front axle bush (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Front Headlamp deteriorated but light output not reduced both (1.7.5a)
Nearside Front Tyre worn close to the legal limit 3.0mm (4.1.E.1)
Offside Front Tyre worn close to the legal limit 3.0mm (4.1.E.1)
Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Rear Tyre wearing on edges
Nearside Rear Wheel bearing has slight noise
Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear Tyre perishing
Offside rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)
Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear Mechanical brake component has restricted free movement (3.5.1k)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Rear Stop lamp not working (1.2.1b)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Rear rear brake binding (3.7.B.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Outer Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
gearbox oil leak
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside rear brake grabbing severely (3.7.A.5b)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Outer Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
gearbox oil leak
Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MW55 BHP is a 2005 Toyota Aygo in Blue with a 998cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 73.1%.
Across all 2005 Toyota Aygo models, the average MOT pass rate is 72.0% with a typical mileage of 61,083 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying MW55 BHP, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 21 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of MW55 BHP?
You can check the full history of MW55 BHP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MW55 BHP registered?
MW55 BHP is a 2005 Toyota Aygo, first registered on 28 October 2005.
Is MW55 BHP safe to buy?
The MOT history for MW55 BHP shows 26 tests with a 73.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MW55 BHP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MW55 BHP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.