2008 Ford Ka

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i))

Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced rear wheel arch (6.1.1 (c) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i))

Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Central Front Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Front Exhaust has a minor leak of exhaust gases from flexi (6.1.2 (a))

Front Lower Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced chassis leg (6.1.1 (c) (i))

Nearside Front headlamp slightly loose

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive lower wheel arch (5.3.6 (a) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Offside Front headlamp slightly loose

Rear Integral body structure is corroded but structural rigidity is not significantly reduced underbody (6.1.1 (c) (i))

Rear Tyre slightly damaged/cracking or perishing both (5.2.3 (d) (ii))

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Road wheel slightly distorted

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn

exhaust /power steering pipe corroded

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Road wheel slightly distorted

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn

exhaust /power steering pipe corroded

Corrosion - exhaust /power steering pipe

Engine oil slightly low

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Inner Road wheel slightly distorted (5.2.2 (c) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Inner Road wheel slightly distorted (5.2.2 (c) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Position lamp not working (4.2.1 (a))